Table of Contents
Advertisement
Rack Mount: Carefully load the rack so that it remains stable and unlikely to tip
over. The unit is also suitable for desktop installation.
1.4 The Back Panel
1
Back Panel Components
1.
Cooling Fan: Do not obstruct.
2.
Power Connector, Voltage Selector and On/Off Switch.
3.
IEEE-1394 Firewire Ports 1 and 2.
4.
10/100 Ethernet Port.
5.
SCSI Ports 1 and 2.
6.
Dip Switches (SW1).
7.
RS-232 Port.
8.
Alarm Out Relay Connection (Future feature).
1.5 Connections
10/100 Ethernet Port
The Ethernet port is used to connect
the DVSe into a network
environment.
SCSI Ports 1 and 2
Connect a SCSI device to one of the
two SCSI ports. Set the dip switches
(SW1) on the back panel. Set SCSI
Termination and SCSI Power to On
and use the Bus Select menu option
to enable this feature.
The unit does not currently support multiple SCSI device connections.
0150-0178F
ETHERNET
IEEE-1394
10/100
PORT 1
PORT 2
2 2 2
3
4
Wire Type: Cat 5.
Connector Type: RJ-45.
Cable Required: Ethernet.
Connector: 50 pin, high density SCSI-2.
Gender (on unit): Female.
SCSI ID: 0.
5
OFF
1 2 3 4
ON
1: SCSI TERMINATION
2: SCSI POWER
3: BUZZER
4: AUX
SCSI
SW 1
PORT 1
PORT 2
OFF
ON
5
6
RS-232
RELAY
7
8
Kalatel DVSe
Advertisement
Table of Contents
