Table of Contents
Advertisement
Map Operation
3. To change to one of the
other Find parameters, press
the NEAREST TYPE Softkey
to
display
the
SELECT
NEAREST TYPE window as
shown in Figure 1-57.
4. Use the Joystick or Rotary
Knob to place the cursor over
the desired Find type.
5. Press the OK Softkey.
Figure 1-57
6. If Airports is selected as
the type (as in Figure 1-57),
pressing
the
AIRPORT
FILTER Softkey (Figure 1-58)
will display the AIRPORT
FILTER CRITERIA Window
as shown in Figure 1-59.
7. The listed airports can be
filtered by runway length and
runway type. Use the Joystick
to place the cursor over the
desired field and use the
Figure 1-58
Rotary Knob select the the
desired value. When finished
press the OK Softkey.
Figure 1-59
1-36
Rev 2 Apr/2004
KMD 250 Pilot's Guide
Advertisement
Table of Contents
