Table of Contents
Advertisement
the cursor to the next field.
Again, use the Rotary Knob to
enter the desired number.
Repeat using the Joystick and
the Rotary Knob until the
desired latitude/longitude is
entered.
13. The second way to enter
the position of a waypoint is by
entering the bearing and dis-
tance from a known position,
such as an airport or navaid.
This is done by first using the
Joystick to place the cursor
over Present Position as
shown in Figure 1-75. Turn the
Rotary Knob one increment to
display
the
ENTRY window as shown in
Figure 1-76.
14. Use a combination of the
Joystick and Rotary Knob as
previously discussed to enter
the desired identifier of the air-
port or navaid as shown in
Figure 1-77. Note the bearing
and distance.
Rev 2 Apr/2004
WAYPOINT
1-45
User Waypoints
Figure 1-75
Figure 1-76
Figure 1-77
KMD 250 Pilot's Guide
Advertisement
Table of Contents
