Baro Correction - Honeywell KMD 250 Pilot's Manual

Multi-function display/gps
Table of Contents

Advertisement

Map Operation
Terrain display to provide situational awareness by displaying a 1/2 nm
ring around the obstacle. For example, the obstacles displayed with a
red ring, as shown in Figure 1-20, are easily identifiable and are within
250 ft. of the present aircraft altitude.
NOTE: The color scale for obstacles is more severe than terrain so that
they stand out on the map.
CAUTION
NEVER USE THE TOPOGRAPHIC ELEVATION DISPLAYED ON
THIS EQUIPMENT AS YOUR SOLE REFERENCE FOR TERRAIN
AVOIDANCE.
The KMD 250 must be receiving altitude information from an altitude
source for the Relative Terrain Map to function. Altitude sources may be
GPS altitude, pressure altitude (ARINC 429 or Gillham) or baro-cor-
rected altitude. The altitude
source options are determined
at installation. If no altitude
information is received a cau-
tion will be displayed as in
Figure 1-21.
NOTE: If a baro-corrected or
pressure altitude source is
used, the Relative Terrain Map
may not display colors accu-
rately in operations above
18,000 feet when the altimeter
Figure 1-21
setting is 29.92 in. Hg.

Baro Correction

If the altitude information
source is Gillham pressure alti-
tude, then a baro correction
must be entered manually. If
the baro correction is not kept
current the Relative Terrain
Map will not display the proper
color coding for the aircraft's
actual altitude.
Figure 1-22
When on the Relative Terrain
Map the KMD 250 will prompt for an entry every 30 minutes as shown in
Figure 1-22. Turn the Rotary Knob to enter the desired barometric set-
ting. After the desired setting is entered, press the OK Softkey.
NOTE: The manual baro correction entry must be kept current on both
the KMD 250 and the altimeter for the Relative Terrain Map to function
properly.
1-21
Rev 2 Apr/2004
KMD 250 Pilot's Guide

Advertisement

Table of Contents
loading

Table of Contents