Honeywell KMD 250 Pilot's Manual page 25

General Information
Icon background will be gray because that function will not be displayed
at that range setting.
If a Status Icon has a light blue (cyan) background the function is cur-
rently being displayed. This does not necessarily mean that data is vis-
ible because there may be nothing to view.
For example, if traffic icons are set to display at 30nm on the Map Setup
Overlays Group Page and the VFR Map range is increased to beyond
30nm, then traffic will no longer be overlayed on the VFR Map display
and the traffic Status Icon background will change from light blue to gray.
The following table illustrates the Function Status Icons and their mean-
ings in more detail.
Icon Colors
Black on cyan
Black on cyan
Black on gray
Black on gray
Black on yellow
Flashing black on
yellow
Flashing black on red
Black on gray with red
slash
Black on cyan
Yellow on cyan
Black on gray
Yellow on gray
Black on gray with red
slash
Rev 4 Aug/2007
Description
Traffic sensor in standby mode being displayed.
Active traffic information being displayed.
Traffic sensor in standby mode, not being displayed.
Traffic sensor active, not being displayed.
TIS service not available.
A Traffic Advisory (TA) alert is active. The icon will be
flashing.
A Resolution Advisory (RA) alert is active. The icon will
be flashing.
Traffic sensor data invalid / not being displayed.
®
Stormscope information being received and dis-
played.<MODE> is either STRK (Strike) or CELL
depending on mode selected on Stormscope
®
Stormscope information being received and displayed.
Strikes have occurred within 25 nm.
®
Stormscope information being received but not dis-
played.
®
Stormscope information being received but not dis-
played. Strikes have occurred within 25 nm.
®
Stormscope information not being received; data is
invalid.
1-6
®
page.
KMD 250 Pilot's Guide