Code 128 Length 1, Length 2 Programming Instructions; Code 128 Conversion To Code 39 - Datalogic Magellan 1100i Product Reference Manual

Code 128 — continued

Code 128 Length 1, Length 2 Programming Instructions

1. Scan the START barcode.
2. Scan either the Set Length 1 or Set Length 2 barcode.
3. Turn to
4. Scan the END barcode.
START / END
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 2

Code 128 Conversion to Code 39

Enables/disables expansion of Code 128 labels to Code 39.
START / END
Product Reference Guide
Appendix C, Alpha-Numeric Pad
the length in decimal notation.
For Code 128 barcodes, only the data charac-
ters are included in the length calculations.
NOTE
PROGRAMMING BARCODES
PROGRAMMING BARCODES
Enable
and scan the two digits (zero padded) representing
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 80
Disable
DEFAULT
Code 128
119