Length Control - Datalogic Magellan 1100i Product Reference Manual

Symbologies
MSI/Plessey — continued

Length Control

Fixed Length Decoding—
barcode if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
decode a barcode if the label length falls in the range of the configurable minimum and maxi-
mum length.
Configuring Fixed Length Decoding:
1. Scan the START/END barcode.
2. Scan the Fixed Length Decoding barcode.
3. Scan the START/END barcode.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed length) by fol-
Configuring Variable Length Decoding:
1. Scan the START/END barcode.
2. Scan the Variable Length Decoding barcode.
3. Scan the START/END barcode.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the
START / END
Fixed Length Decoding
140
When fixed length decoding is enabled, the scanner will decode a
below.
gramming Instructions
lowing the
MSI/Plessey Length 1, Length 2 Programming Instructions
below.
Programming Instructions
below.
Programming Instructions
PROGRAMMING BARCODES
When variable length decoding is enabled, the scanner will
Variable Length Decoding
MSI/Plessey Length 1, Length 2 Pro-
below.
MSI/Plessey Length 1, Length 2
MSI/Plessey Length 1, Length 2
DEFAULT
Magellan TM 1100i