Length Control - Datalogic Magellan 1100i Product Reference Manual

PDF 417 — continued

Length Control

Fixed Length Decoding—
barcode if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
decode a barcode if the label length falls in the range of the configurable minimum and maxi-
mum length.
Configuring Fixed Length Decoding:
1. Scan the START barcode.
2. Scan the Fixed Length Decoding barcode.
3. Scan the END barcode.
4. Set Length 1 to the first fixed length by following the Length 1, Length 2 Programming
5. Set Length 2 to the second fixed length (or to '0000' if there is only one fixed length) by
Configuring Variable Length Decoding:
1. Scan the START barcode.
2. Scan the Variable Length Decoding barcode.
3. Scan the END barcode.
4. Set Length 1 to the minimum length by following the
5. Set Length 2 to the maximum length by following the
START / END
Fixed Length Decoding
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a
Instructions below.
following the
PDF 417 Length 1, Length 2 Programming Instructions
below.
gramming Instructions
below.
gramming Instructions
PROGRAMMING BARCODES
When variable length decoding is enabled, the scanner will
Variable Length Decoding
2D Symbologies
below.
PDF 417 Length 1, Length 2 Pro-
PDF 417 Length 1, Length 2 Pro-
DEFAULT
153