Installation; Fitting The Feet - Miele 09 580 070 Operating And Installation Instructions

Installation

Fitting the feet

98
The appliance is supplied with four feet.
If the building-in niche is 350 mm high, the steam oven is
installed without fitting the feet.
If the building-in niche is 360 mm high, the feet need to be
screwed into the appliance before installing it in the niche.
If the appliance is being installed in a counter top casing
(DGSG) or in a building-under casing (DGUG) the feet must
not be fitted.
^ Carefully place the appliance on its back and screw the
four feet into the holes provided (see illustration).