Application Range - Yamaha EF1000iS Owner's Manual

AE01000

APPLICATION RANGE

AC
Power factor
EF1000iS
1
NOTICE
9 Do not overload. The total load of all electrical appliances must not exceed
the supply range of the generator. Overloading will damage the generator.
9 When supplying precision equipment, electronic controllers, PCs, electronic
computers, microcomputer-based equipment or battery chargers, keep the
generator a sufficient distance away to prevent electrical interference from
the engine. Also ensure that electrical noise from the engine does not inter-
fere with any other electrical devices located near the generator.
9 If the generator is to supply medical equipment, advice should first be
obtained from the manufacturer, a medical professional or hospital.
9 Some electrical appliances or general-purpose electric motors have high
starting currents, and cannot therefore be used, even if they lie within the
supply ranges given in the above table. Consult the equipment manufacturer
for further advice.
1 0.8–0.95
–900W
TIP
9 "–" means below.
9 Application wattage indicates when each device is
used by itself.
9 The simultaneous usage of AC and DC power is
possible but total wattage should not exceed the
rated output.
EX:
Frequency
9 The overload indicator light comes on when total
wattage exceeds the application range. (See page
17 for more details.)
763-225
1 Overload indicator light
0.4–0.75
(Efficiency 0.85)
–720W
Generator rated output
Power factor
AC
DC
– 15 –
Rated voltage
–300W
Rated current
1.0
0.8
—
(12V/8A)
DC
12V
8A
900VA
–800W
–620W
96W