Yamaha EF1000iS Owner's Manual page 31

6
0°C 25°C
å YAMALUBE 4 (10W-40)
∂ SAE 10W ç SAE #20
32°F 80°F
5. Place an oil pan under the engine. Tilt the genera-
tor to drain the oil completely.
6. Place the generator on a level surface and
remove the oil drain joint.
700-120
7. Add engine oil to the upper level of the filler hole
using the oil filler guide.
6 Oil filler guide
NOTICE
700-126a
9 Do not tilt the generator when adding engine
oil. This could result in overfilling and damage
to the engine.
9 Be sure no foreign material enters the
crankcase.
Recommended engine oil:
å
∫
ç
∂
Recommended engine oil grade:
API Service SE type or higher
∫ SAE #30
Engine oil quantity:
0.32 L (0.34 US qt, 0.28 lmp qt)
8. Wipe the oil drain joint clean, and wipe up any
spilled oil.
9. Install the oil filler cap.
10. Install the oil drain joint in its original position.
700-117a
11. Install the cover and the screw.
788-010
YAMALUBE 4 (10W-40),
SAE 10W-30 or 10W-40
SAE #30
SAE #20
SAE 10W
– 26 –