Download Print this page
   

Advertisement

INSTALLATION AND OPERATION MANUAL
Congratulations on your purchase of your new Yamaha.
This manual will provide you with a good basic understanding of the operation and installation of this
product.
If you have any questions regarding the installation or operation of your machine, please consult a Yamaha
dealer.
Particularly important information is distinguished in this manual by the following notations.
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS
Q
INVOLVED!
Failure to follow WARNING instructions could result in severe injury or death to the
w
engine operator, a bystander or a person inspecting or repairing the engine.
A CAUTION indicates special precautions that must be taken to avoid damage to the
cC
engine.
A NOTE provides key information to make procedures easier or clearer.
NOTE:
w
8
This kit can be used for wireless remote control of Yamaha's EF4500iSE Generator only. Do not
use this product for any other purposes.
8
Before using the remote control kit, carefully read and understand this manual, the generator's
owner's manual and warning labels attached to the generator. Also, become familiar with the
generator operations, safety information and important information.
8
Keep this manual together with the generator's owner's manual, and use them if you have any
questions or problems during operation. If you resell or transfer your generator to another person,
remember to attach this manual to it.
cC
Do not use this product in other countries, as doing so may be illegal.
NOTE:
8 The remote control can be used approximately 20 meters away from the generator if there are no
obstacles between them.
8 This communication distance depends on the ambient environment and the situation in which you use
the remote control. The communication distance becomes shorter if there are any obstacles between
you and the generator. Also, if you use the remote control near the radio transmitter facility, the radio
communication distance may be reduced greatly or the communication itself may fail.
8 If the remote control has a delay in responding or it does not respond at all, the service life of the cells
of remote control may have expired, or the generator battery may have discharged. Replace dry cell
batteries of the remote control, or recharge the generator battery.
EF4500iSE Remote control kit
7XF-2819W-10

Advertisement

   Related Manuals for Yamaha EF4500iSE

   Summary of Contents for Yamaha EF4500iSE

  • Page 1

    This manual will provide you with a good basic understanding of the operation and installation of this product. If you have any questions regarding the installation or operation of your machine, please consult a Yamaha dealer. Particularly important information is distinguished in this manual by the following notations.

  • Page 2

    INSTALLING Parts of remote control kit Receiver unit 1 ×1 Band 2 ×1 Screw 3 ×2 Switch label 4 ×1 Remote control switch 5 ×1 Wire harness 6 ×1 Clamp 7 ×2 Warning label 8 ×1 Remote control transmitter 9 (with dry cell batteries)×1 WARNING Installing procedure...

  • Page 3

    3. Remove four screws and remove the meter unit c. To avoid parts becoming damaged by static electricity, discharge the electricity from your body by touching the engine or other metal surface before servicing the meter unit. 4. Disconnect the engine switch coupler d. e ..

  • Page 4

    HOW TO USE THE REMOTE CONTROL lNSTRUCTION TO THE USER Yamaha Motor Corporation USA This device complies with Part 15 of the FCC Rules Model ACCGNRST3001 Operation of this device is subject to the following two conditions:...

  • Page 5

    interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determinde by turning the equipment off and on, the user in encouraged to try to correct the interference by one or more of the following measures:...

  • Page 6

    NOTE: When both the engine switch of generator and the remote control switch 4 are in "ON" position, the generator becomes ready to receive signals from the remote control transmitter and you can operate the generator by remote control. Preparing the remote control of generator 1.

  • Page 7

    Stopping the generator by remote control Push "OFF" button 1 of the remote control transmitter for longer than 0.5 seconds. When this operation is correct, indicator lamp 2 of the remote control transmitter lights for approximately 1 second. And, the stop signal is sent to the generator.

  • Page 8

    1. Remove the screws from remote control transmitter, and disassemble it. 2. Take out the dry cell batteries in the direction of a . 3. Insert new dry cell batteries from the direction of b . Specifi ed dry cell battery : CR2032 (3.0 V) button cell battery Quantity : 2 Transmit ID to the receiver unit For the user who purchased only the remote control transmitter, need to transmit ID to the receiver after...

  • Page 9: Troubleshooting

    →Replace the dry cell batteries. (See “How to replace dry cell batteries“ page 7.) 8 The radio waves do not reach the generator. → Move to another location and try the remote control. ● The remote control transmitter is lost. Please consult a Yamaha dealer. page...

  • Page 10

    EF4500iSE remote control kit INSTALLATION AND OPERATION MANUAL © 2008 by Yamaha Motor Corporation, U.S.A. Printed in Japan. page...

Comments to this Manuals

Symbols: 0
Latest comments: