How To Perform A Scan - Fujitsu ScanSnap iX500 Operator's Manual

4.
Click the [Apply] button.

How to Perform a Scan

This section explains how to use profiles to perform scanning.
The following explains an example in which the scanned image file is linked to Mac OS
Preview.
1.
Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to
(Mac OS)" (page
The ScanSnap setup window appears.
2.
Clear the [Use Quick Menu] checkbox.
3.
Click the [Apply] button in the ScanSnap setup window.
4.
Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
36).
374
Profile (for Mac OS Users)
"ScanSnap Manager Menu