Fujitsu ScanSnap iX500 Operator's Manual page 119

Procedures
HINT
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap setup
dialog box.
For details about how to perform scanning by using the Quick Menu, refer to
Flow" (page 108).
1.
Load a document in the ScanSnap.
For details, refer to
2.
Press the [Scan] button on the ScanSnap to start a scan.
The Quick Menu appears when the scanning is completed.
ATTENTION
You cannot start scanning when the Quick Menu is displayed. Wait until ScanSnap Organizer
links before scanning another document.
Do not move, delete or rename the scanned image in other applications when the Quick Menu is
displayed.
Using ScanSnap with the Quick Menu (for Windows Users)
"How to Load Documents" (page
119
"Basic Scanning Operation
57).