3Com Access Builder 7000 User Manual page 33

Installing The Module 2-3
No connecting cables are supplied with the Bridge/Router Module as
standard. Check that you have suitable cables for any connections you
want to make to any of the following ports:
ISDN port (BRI Bridge/Router Module only).
LAN port.
WAN port
See Appendix A for cable pin-outs and types.
CAUTION: At all times, take care not to touch any of the connectors or
components on the cards to avoid damage by static electricity. Handle
the cards by the handles or by their edges. Use an anti-static wrist strap
during installation if you have one available.