Table of Contents
Advertisement
2-12
C
2: I
HAPTER
d If you are routing, edit the Port IP address to set it to
or to a valid IP address for the WAN link.
See the AccessBuilder ISDN Access Router Software Reference guide for
more information about using numbered and unnumbered links.
If you are bridging, leave this field at the default setting.
e If necessary, change any of the other parameters to suit your WAN
link. In most cases the defaults can be used.
f Press [CTRL]+[E] to submit this configuration.
The WAN port is now configured and, provided the remote unit's WAN
port has also been configured, data will be passed across the link.
Enter
configuration in the unit's memory.
O
NSTALLATION AND
PERATION
at the command prompt to permanently store this
SAVE
UNNUMBERED
Advertisement
Table of Contents
