Troubleshooting - Alcatel-Lucent OmniSwitch 9000 Series Getting Started Manual

Troubleshooting

The WebView login screen does not display.
This suggests either a physical or network connection issue.
Try the following options:
Be sure that you have a good physical Ethernet cable
•
connection to the Ethernet port used for managing the
switch (EMP or NI port).
Be sure your computer has a valid Ethernet connection
•
and IP address. See
uring the IP address for the EMP.
The login screen displays, but my login attempt fails.
This suggests either a user name and password or Authenti-
cated Switch Access error. Try the following options:
Check that you are using the correct user name and
•
password. If you have already changed the user name
and password for your switch, be sure to use the new
information. If you have not changed the user name
and password, the factory defaults are admin and
switch, respectively.
Be sure that you have "unlocked" HTTP sessions on
•
the switch. To unlock HTTP sessions, enter the follow-
ing command:
-> aaa authentication http local
See page 22 for information on unlocking session types.
38 Using WebView
page 21 for information on config-
May 2007