Scan Line Width; Laser On Time - Motorola Symbol LS4278 Product Reference Manual

5 - 10 Symbol LS4278 Product Reference Guide

Scan Line Width

Scan a bar code below to set the scan line width.
*
Full Width
Small Width

Laser On Time

This parameter sets the maximum time that decode processing continues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes beginning on
Appendix D, Numeric Bar Codes
zero. For example, to set an On Time of 0.5 seconds, scan the bar code below, then scan the "0" and "5" bar
codes. If an error is made, or the selection needs to be changed, scan Cancel on
that correspond to the desired on time. Single digit numbers must have a leading
Medium Width
page D-1
page D-3.
Laser On Time
in