Special Commands; Pause Duration; Begin New Rule; Save Rule - Motorola Symbol LS4278 Product Reference Manual

14 - 8 Symbol LS4278 Product Reference Guide
ADF Bar Codes (Continued)
Table 14-1
End of Message
a - z
{ - ~

Special Commands

Pause Duration

Use this parameter, along with
pause by scanning a two-digit number (i.e., two bar codes) from
intervals. For example, scanning bar codes 0 and 1 inserts a 0.1 second pause; 0 and 5 inserts a 0.5 second delay.
To correct an error or change a selection, scan

Begin New Rule

Scan the bar code below to start entering a new rule
.

Save Rule

Scan the bar code below to save the rule.
Parameter
Send Pause on page 14-28,
Cancel on page
Pause Duration
Begin New Rule
Page
Number
14-96
14-96
14-100
to insert a pause in the data transmission. Set the
Appendix D, Numeric Bar Codes
D-3.
Save Rule
in 0.1 second