Usb Parameter Defaults - Motorola Symbol LS4278 Product Reference Manual

Select the USB device type by scanning the appropriate bar code from
3.
On first installation when using Windows, the software prompts to select or install the Human Interface Device
4.
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The cradle powers up during this installation.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner cradle
remain the same.
If problems occur with the system, see

USB Parameter Defaults

Table 8-1 lists the defaults for USB host parameters. If any option needs to be changed, scan the appropriate bar
code(s) provided in the Parameter Descriptions section beginning on
NOTE See
miscellaneous default parameters.
USB Host Default Table
Table 8-1
USB Host Parameters
USB Device Type
USB Country Keyboard Types (Country Codes)
USB Keystroke Delay
USB CAPS Lock Override
USB Ignore Unknown Characters
Emulate Keypad
USB FN1 Substitution
Function Key Mapping
Simulated Caps Lock
Convert Case
Ignore Beep
Ignore Bar Code Configuration
Troubleshooting on page
Appendix A, Standard Default Parameters
Parameter
USB Device Type on page
3-2.
page 8-4.
for all user preferences, hosts, symbologies, and
Default
HID Keyboard Emulation
North American
No Delay
Disable
Send
Disable
Disable
Disable
Disable
No Case Conversion
Disable
Disable
USB Interface
8-4.
Figure 8-1 are examples
Page
Number
8-4
8-5
8-7
8-7
8-8
8-9
8-9
8-9
8-10
8-10
8-11
8-11
8 - 3