KTM 1190 Adventure EU Owner's Manual page 156

16 ELECTRICAL SYSTEM
Info
Even when there is no load on the battery, it discharges steadily.
The charge state and the type of charge are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the battery's service life.
If the charging current, charging voltage, and charging time are exceeded, electrolyte escapes through the safety valves. This
reduces the battery capacity.
If the battery is depleted from starting the vehicle repeatedly, the battery must be charged immediately.
If the battery is left in a discharged state for an extended period, it will become over-discharged and sulfate, destroying the battery.
The battery is maintenance-free, i.e., the acid level does not have to be checked.
If the battery is not charged using the KTM battery charger, the battery must be removed for charging. Otherwise, overvoltage may
damage electronic components. Charge the battery according to the instructions on the battery housing.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the passenger seat. (
–
Remove the driver's seat. (
Main work
–
Pull locking mechanism
–
Fold open cover
S00373-10
p. 99)
p. 100)
1 in the direction of the arrow.
2
.
154