Running In The Engine - KTM 1190 Adventure EU Owner's Manual

9 PREPARING FOR USE
Warning
Danger of accidents Failure of brake system.
–
If the foot brake lever is not released, the brake linings drag continuously. The rear brake may fail due to overheating. Take your
foot off the foot brake lever when you are not braking.
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the Service and Warranty Booklet at vehicle handover.
–
Before your first trip, read the entire Owner's Manual carefully.
–
Get to know the controls.
–
Adjust the motorcycle to your requirements, as described in the "Ergonomics" chapter.
–
Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible and
in a standing position to get a better feeling for the motorcycle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in.
9.2

Running in the engine

–
During the running-in phase, do not exceed the specified engine speed.
Guideline
Maximum engine speed
During the first: 1,000 km (620 mi)
After the first: 1,000 km (620 mi)
–
Avoid fully opening the throttle!
6,500 rpm
10,250 rpm
72