KTM 1190 Adventure EU Owner's Manual page 144

15 WHEELS, TIRES
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease shaft seal ring
Long-life grease (
–
Clean and grease the thread of the wheel spindle and nut.
Long-life grease (
S00285-10
–
Mount the rubber dampers and rear sprocket carrier in the rear wheel.
–
Place the rear wheel in the swingarm and bring the brake disc on the brake caliper into
contact.
–
Mount wheel spindle
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.
S00287-10
x
1
and contact surface
p. 215)
p. 215)
2
but do not push it in all the way.
142
A
of the spacer.