Related Manuals for KTM 1190 Adventure 2014
Summary of Contents for KTM 1190 Adventure 2014
- Page 1 SETUP INSTRUCTIONS 2014 1190 Adventure EU 1190 Adventure FR 1190 Adventure AU 1190 Adventure JP 1190 Adventure US Art. no. 3213162en...
- Page 3 KTM accepts no liability for delivery options, deviations from illustrations and descriptions, as well as misprints and other errors.
-
Page 4: Means Of Representation
MEANS OF REPRESENTATION Symbols used The meaning of specific symbols is described below. Indicates an expected reaction (e.g. of a work step or a function). Indicates an unexpected reaction (e.g. of a work step or a function). Indicates a page reference (more information is provided on the specified page). Indicates information with more details or tips. - Page 5 SETUP Unpacking and setting up the vehicle Preparatory work – Remove the box. Main work – Remove the adhesive tape in the upper area of the motorcycle. 202178-10 – Roll down the film at the sides. Info To avoid damaging the motorcycle during unpacking, leave the other films on the vehicle until you have finished work on the vehicle.
- Page 6 SETUP – Remove the film from the headlight. Position the screen. Mount and tighten screws 202183-10 – Mount and tighten the rear mirror on both sides. 202184-10 – Mount reflector on retaining plate with spring washers –...
- Page 7 SETUP – Print out the current PDI form found on KTM DEALER.NET and perform the delivery inspection.
- Page 8 WORK Removing the passenger seat – Insert the ignition key in seat lock and turn it clockwise. – Raise the front of the passenger seat, pull it toward the tank, and remove it upward. – Remove the ignition key. G00574-10 Mounting the passenger seat –...
-
Page 9: Recharging The Battery
The battery is maintenance-free, i.e., the acid level does not have to be checked. If the battery is not charged using the KTM battery charger, the battery must be removed for charging. Otherwise, overvoltage may damage electronic components. Charge the battery according to the instructions on the battery housing. - Page 10 WORK – Connect the battery charger to the battery. Switch on the battery charger. Battery charger (58429074000) You can also use the battery charger to test the open-circuit voltage and start potential of the battery, and to test the alternator. With this device, you cannot overcharge the battery.
- Page 11 WORK Warning Environmental hazard Improper handling of fuel is a danger to the environment. – Do not allow fuel to get into the ground water, the ground, or the sewage system. – Switch off the engine. – Open the filler cap. ( p.
- Page 12 WORK Closing the filler cap – Fold down filler cap – Turn ignition key clockwise. S00352-10 – Press down the filler cap and turn back ignition key until the fuel tank lock locks. Warning Fire hazard Fuel is highly flammable, poisonous and harmful to your health.
-
Page 13: Technical Data - Tightening Torques For Chassis
TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS – Screw, combination switch, left 2 Nm (1.5 lbf ft) – Screw, side stand switch 2 Nm (1.5 lbf ft) – Remaining screws, chassis 5 Nm (3.7 lbf ft) – Screw, brake line holder on swingarm 5 Nm (3.7 lbf ft) –... - Page 14 TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS – Screw, rear footrest bracket 25 Nm (18.4 lbf ft) – Screw, steering damper clamp 12 Nm (8.9 lbf ft) – Screw, suitcase hook 20 Nm (14.8 lbf ft) – Screw, top triple clamp 15 Nm (11.1 lbf ft) –...
- Page 15 SUBSTANCES Super unleaded (ROZ 95/RON 95/PON 91) Standard/classification – DIN EN 228 (ROZ 95/RON 95/PON 91) Guideline – Only use unleaded super fuel that matches or is equivalent to the specified fuel grade. – Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use. Info Do not use fuel containing methanol (e.
- Page 16 *3213162en* 3213162en 01/2014 KTM-Sportmotorcycle AG 5230 Mattighofen/Austria Photo: Mitterbauer/KTM http://www.ktm.com...