KTM 1190 Adventure EU Owner's Manual page 109

13 SERVICE WORK ON THE CHASSIS
0 0 0
–
Shift the transmission to idle
–
Pull the lower chain section with specified weight
Guideline
Weight, chain wear measurement
–
Measure distance
Info
Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.
Maximum distance
chain section
»
If distance
–
Change the power set.
401665-10
.
B
of 18 chain rollers on the upper part of the chain.
B
at the longest
B is greater than the specified measurement:
x
Info
When the chain is replaced, the rear sprocket and engine sprocket
should also be changed.
New chains wear out faster on old, worn sprockets.
For safety reasons, the chain has no chain joint.
A
.
15 kg (33 lb.)
272 mm (10.71 in)
107