Paper Recommendations; Cassette Trays - Oki MC860 User Manual

P
APER RECOMMENDATIONS
Your MFP will handle a variety of print media, including a range of paper weights and sizes,
transparencies and envelopes. This section provides general advice on choice of media, and
explains how to use each type.
The best performance will be obtained when using standard 75~90g/m² paper designed
for use in copiers and laser printers. A suitable type is Color Copy by Mondi.
Use of heavily embossed or very rough textured paper is not recommended.
Pre-printed stationery can be used, but the ink must not offset when exposed to the high
fuser temperatures used in the printing process.
Envelopes should be free from twist, curl or other deformations. They should also be of the
rectangular flap type, with glue that remains intact when subjected to hot roll pressure
fusing used in this type of MFP. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers and laser printers. We
strongly recommend Oki transparencies (Order No. 01074101). In particular, avoid office
transparencies designed for use by hand with marker pens. These will melt in the fuser and
cause damage.
Labels should also be of the type recommended for use in copiers and laser printers, in
which the base carrier page is entirely covered by labels. Other types of label stock may
damage the printer due to the labels peeling off during the printing process. A suitable type
is Avery White Laser Label types 7162, 7664, 7666 (A4), or 5161 (Letter).
Business cards recommended are produced by Oki (Order No. 09002985).
C
ASSETTE TRAYS
SIZE
A6
A5 (Tray 1 only)
B5
Executive
A4
B4
A3
Letter
Legal 13in.
Legal 13.5in.
Legal 14in.
If you have identical paper stock loaded in another tray (2nd/3rd tray if you have one, or
the multi purpose tray) you can have the MFP switch to another tray when the current tray
runs out of paper. When printing from Windows applications, this function is enabled in the
driver settings (refer to the Printing Guide). When printing from other systems, this
function is enabled in the Paper Setup menu (See
If fitted, tray 2 (or 3) may be removed and replenished while the machine is being fed from
tray 1. Tray 1 cannot be removed while the machine is being fed from tray 2 (or 3) because
parts of tray 1 are used to guide paper fed from tray 2 (or 3).
DIMENSIONS
105 x 148mm
148 x 210mm
182 x 257mm
184.2 x 266.7mm
210 x 297mm
250 x 353mm
420 x 297mm
215.9 x 279.4mm
216 x 330mm
216 x 343mm
216 x 356mm
"Paper Setup" on page
Getting started > 22
WEIGHT (G/M²)
Light 64-82g/m²
Medium 83-105g/m²
Heavy 106-128g/m²
Ultra Heavy 129-200g/m²
Note:
Tray 1 supports up to 120g/m².
> 176g/m² - MP Tray only.
33).