FieldServer FS-8700-39 EST3 ECP Instruction Manual page 8

Est3 external communications protocol (ecp) driver
Table of Contents

Advertisement

FS-8700-39 EST3 Driver Manual
Column Title
EST_Alarm_DA*
EST_Trouble_DA*
EST_Supervisory_DA*
EST_Monitor_DA*
EST_Others_DA*
EST_Active_DA
EST_Relay_Conf_DA
EST_Types_DA
EST_Types_Update
DA_Bit_Name
EST_Report_Type
4
Refer to Appendix A.4 and Section 4.4.4
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Function
Data Array to store Alarm state
Data Array to store Trouble
4
state
Data Array to store Supervisory
4
state
Data Array to store Monitor state
Data Array to store state other
than Alarm, Trouble, Supervisory
4
or Monitor
Data Array to store the raw value
of the active bit.
Relay confirmation state. Refer
to Appendix A.5 for more
information.
Data Array to hold Types
category. Refer to Appendix
A.5.2
Update the default Types list or
refer to new list. Requires
'EST_Types_DA' parameter to
be defined. Refer to Appendix
A.5.3
Acknowledge State. Refer to
Appendix A.5.4
Store information from particular
Report
Page 8 of 21
Legal Values
4
4
One of the Data Array Names
declared in Data Arrays section
-, yes, new list
One of the Data Array Names
declared in Data Arrays section
-, Point I/O Status, Sensitivity,
Date Time

Advertisement

Table of Contents
loading

Table of Contents