Panasonic DP-3010 Service Handbook page 85

No. Item
087 ADU Intermediate Roller Clutch
088- Not Used
099
100 Inner Upper Paper Exit Solenoid
101 Inner Lower Paper Exit Solenoid
102 Paper Transport Unit Motor
(Exit to Outer Tray)
103 Paper Transport Unit Motor
(Exit to ADU)
104 Paper Guide Solenoid ON
105 Paper Guide Solenoid OFF
106- Not Used
109
110 Paper Feed Motor
Paper Alignment Motor
Paper Tray Lift Motor
Stapler Motor
Paddle Solenoid
Large Gear Solenoid
Paper Hold Lever Solenoid
111- Not Used
119
120 Lamp
121- Not Used
159
160 ADF Paper Feed Motor Rotating
(35% speed rotating)
161 ADF Paper Feed Motor Rotating
(100% speed rotating)
162 ADF Paper Feed Motor Rotating
(400% speed rotating)
Ver. 2.0
F4 Mode (Output Check)
Function
When SPC PCB CN711-2 signal
level changes to 0V from +24V, the
Clutch operates.
When SPC PCB CN719-3 signal
level changes to 0V from +24V, the
clutch turns OFF.
When SPC PCB CN719-1 signal
level changes to 0V from +24V, the
clutch turns.
Paper transport unit motor rotates in
the forward direction.
Paper transport unit motor rotates in
the reverse direction.
When EXFD PCB CN792-1 signal
level changes to 0V from +24V,
clutch turns ON for Straight Paper
Exit.
When EXFD PCB CN792-3 signal
level changes to 0V from +24V,
clutch turns OFF for Inverting Paper
Exit.
Feed Motor rotates.
Paper Alignment Motor drives the
Alignment Plate.
Paper Tray Lift Motor drives the
Paper Tray up and down.
Stapler Motor rotates 2 sec. cycle.
Solenoid turns ON/OFF 500 msec.
cycle.
Solenoid turns ON/OFF 500 msec.
cycle.
Solenoid turns ON/OFF 1 sec. cycle.
When SDR PCB CN656-1 signal
level changes to 0V from +5V, Lamp
operates.
ADF paper feed motor rotates at
35% speed.
ADF paper feed motor rotates at
100% speed.
ADF paper feed motor rotates at
400% speed.
85
DP-2310/3010
DP-2330/3030
Remark
1-Bin Finisher (FS300).
DEC 2004