Panasonic DP-3010 Service Handbook page 102

4.1.8. F9 Mode: Unit Maintenance
Set the machine to Service Mode and press "9" key on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Touch Panel display.
↓
If you wish to select another code number, scroll the menu with the arrow buttons.
↓
Select the desired function on the Touch Panel display and touch the "OK" button.
↓
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
Service
Mode
F9 Unit
Maintenance
Ver.2.0
Item
00 Fax Service Mode
01 Service Alert Tel #
02 Firmware 00 SC
Version
01 SC Boot
02 PNL
03 SPC
04 Finisher
05 FAX Modem
06 Not Used
07 SC2
03 Print 00 F5/F6 Parameters
Device Info.
01 Machine Information Prints the machine setup information list.
02 System Address
Info.
03 RAM Address
Information
04 RAM Edit 00 Relative Address
Mode
01 Real Address
05 Not Used
F9 Mode
Displays the contact number when a
machine malfunction occurs.
Displays the firmware version for SC.
Displays the firmware version for SC
Boot.
Displays the firmware version for PNL.
Displays the firmware version for SPC.
Displays the firmware version for
finisher.
Displays the firmware version for FAX
option 1.
Displays the firmware version for Slot 1.
Prints the memory contents of the F5
and F6 modes.
Prints the system memory setting.
Prints the RAM data dump list.
Setting of Relative address.
Setting of Real address.
102
DP-2310/3010
DP-2330/3030
Remarks
DEC 2004