Panasonic DP-3010 Service Handbook page 83

2. Output Check
Press the "START" key to start and press the "STOP" key to reset.
No. Item
040 Total Counter
041 Key Counter / Card Counter
042- Not Used
049
050 Main Motor
051 Toner Bottle Motor Rotation In
Forward Direction
052 Toner Supply Clutch
053 LSU Fan / Power Supply Fan /
Book Fan
054 Density Sensor Solenoid
055 Not Used
056 Fuser Fan
057 Not Used
058 Fuser Web Solenoid
059- Not Used
060
061 Registration Clutch
062 Not Used
063 Paper Feed Roller Clutch
(1st Paper Tray)
Ver. 2.0
F4 Mode (Output Check)
Function
When SPC PCB CN715-8 signal
level changes to 0V from +24V,
count up the Total Counter.
When SPC PCB CN726-2 signal
level changes to 0V from +24V,
count up the Key Counter.
When SPC PCB CN726-6 signal
level changes to 0V from +5V, count
up the Card Counter.
When SPC PCB CN723-2 signal
level changes to 0V from +5V, the
Main Motor activates.
When SPC PCB CN720-16 signal
level changes to 0V from +24V, the
Motor rotates in the forward
direction.
When SPC PCB CN720-18 signal
level changes to 0V from +24V, the
Clutch activates.
When SPC PCB CN704-10 is 24V,
LSU Fan rotation is high-speed.
When SPC PCB CN704-9 is 24V,
Power Supply Fan rotation is
high-speed.
When SPC PCB CN709-16 is 24V,
Book Fan rotation is high-speed.
When SPC PCB CN714-6 signal
level changes to 0V from +24V, the
Solenoid activates.
When SPC PCB CN709-13 is 24V,
Fuser Fan rotates.
When SPC PCB CN721-12 signal
level changes to 0V from +24V, the
Solenoid activates.
When SPC PCB CN715-2 signal
level changes to 0V from +24V,
clutch operates.
When SPC PCB CN715-4 signal
level changes to 0V from +24V,
clutch operates.
83
DP-2310/3010
DP-2330/3030
Remark
1 minute
1 minute
DEC 2004