15. Tighten nine #8 x 3/4" Screws (2) into the
Console Base Back (93) in the indicated loca-
tions, starting with the center Screw.
Note: Some of the screws are designed to go in
at different angles.
16. Slide the Handrail Covers (79, 80) forward until
they match up with the Console Base (64).
Attach the Handrail Covers with the four #8 x 1
1/4" Screws (107) that you removed in steps 9
and 10. Do not overtighten the Screws.
Tighten four #8 x 3/4" Screws (2) into the con-
sole assembly in the locations shown.
Note: Some of the screws are designed to go in
at different angles.
Raise the Base Covers (82, 83) and firmly
tighten the four 3/8" x 2 3/4" Screws (7) first and
then the 3/8" x 1 1/4" Screws (8) (only one side
is shown). Then, press the Base Covers into
place.
15
Start First
2
2
16
Console
Assembly
107
2
79
82
14
93
2
2
2
2
2
107
80
83
2
64
7
8