4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the SnowBlind™ FX are accessed by
using the control panel on the side of the fixture. There are 4 control buttons below the
LED display which allow you to navigate through the various control panel menus.
<MODE>
Is used to navigate the various modes.
<SETUP>
Is used to enter into the selected mode setup.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
The Control Panel LED Display shows the menu items listed on the Control Panel Menu
Structure below. Pushing the <MODE> button repeatedly will scroll through the menu
settings. To edit one, push the <SETUP> button. Then use the <UP> and <DOWN>
buttons to scroll through your choices (if applicable). Push the mode button to confirm.
Control Panel Menu Structure
d --
CON
Pro
AUT
Sd1
Sd 2
SLA
NOTE: If buttons are not pressed within 20 seconds, the LED display will shut off.
SnowBlind™ FX Manual - Rev. B
Mode
Setup
001 - 255
000 - 255
Pr.1 - Pr.4
SP.1 - SP.9
<SETUP>
SP.1 - SP.9
<SETUP>
<SETUP>
<SETUP>
Page 12
up
doWN
DMX Starting Address
Brightness Adjustment (0% <-->100%)
Built-in programs 1-4 <SETUP>
Speed Adjustment (Slow <--> Fast)
Sets the Fixture to Auto Mode
Speed Adjustment (Slow <--> Fast)
Sound Active Mode 1
Sound Active Mode 2
Sets the Fixture to Slave Mode
Copyright (c) 2013 Blizzard Lighting, LLC