Using Your System; Commands At A Glance; Start Engine; Unlock Doors - Viper 4205V Owner's Manual

Using Your System

Commands At a Glance

System State
ENGINE OFF
ENGINE ON

Start Engine

When the engine is OFF, press and release the remote control button to
start the engine. The remote plays the remote start activation tones and
the green LED flashes once.
See"Using Remote Start" on page 3 for more feature details.

Unlock Doors

When the engine is ON, press and release the remote control button.
The doors unlock, the parking lights flash, the horn sounds (if connect-
ed) as confirmation. The remote confirms unlocking with 2 short beeps
and a green LED flash.
Note: Horn honk may be an optional feature that requires additional
parts and labor.

Stop Engine

When the engine is ON, press and hold the remote control button for
3 seconds. The engine stops running and the parking lights turn off.
The remote plays the remote start shut off tones and the orange LED
flashes 1 time.
2
Press/Release
START ENGINE
UNLOCK DOORS
Press/Hold for 3 sec.
CAR FINDER
STOP ENGINE
© 2013 Directed. All rights reserved.