Table of Contents
Advertisement
Battery Information
The remote control is powered by two coin cell batteries (CR-2016) that
can be purchased at most retailers. The operating range diminishes as
the battery charge depletes.
Replacing the Battery
1.
If present, remove the small screw on the back of the remote.
2.
Use a small flat blade screw driver and insert it into the slot located
along the bottom of the remote, near the key ring. Carefully pry
open the case.
3.
Gently slide out the used batteries to remove them from the holding
clip. Orient the new batteries for the correct polarity and insert
into holding clip.
4.
Reposition case parts, and snap together by pressing firmly and
evenly on the front and back. Reinstall screw (if applicable).
Battery Disposal
Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal or return to Directed.
ii
© 2013 Directed. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
