Led Indicators - D-Link xStack Hardware Installation Manual

xStack® DGS-3420 Series Layer 2+ Managed Stackable Gigabit Switch Hardware Installation Reference Guide
Maximum Forwarding
Rate
Priority Queues
MAC Address Table
Virtual Stacking /
Clustering

LED Indicators

Location LED Indicative
Per Device Power
Console
RPS
SD
MGMT
Stacking ID
DGS-3420-52T: 176Gbps
DGS-3420-52P: 176Gbps
DGS-3420-28SC: 95.24 million packets per second.
DGS-3420-28TC: 95.24 million packets per second.
DGS-3420-26SC: 66.47 million packets per second.
DGS-3420-28PC: 95.24 million packets per second.
DGS-3420-52T: 130.95 million packets per second.
DGS-3420-52P: 130.95 million packets per second.
8 Priority Queues per port
Supports 16K MAC address
Supports 256 static MAC
•
Support D-Link Single IP Management v1.6
•
Manage up to 32 devices in a virtual stack with a single IP address.
Color
Green
Green
Green
Green
Red
Green
Green
Status Description
Solid Light Power on
Light off Power off
Solid Light Console on
Light off Console off
Blinking When switch detects that RPS is
connected
Solid Light RPS in using
Light off RPS off
Solid Light Plugged in
Blinking Busy Reading and Writing
Light off No link
Solid Light Read/Write Failed
Solid Light Console on
Blinking Secure connection established
Light off Console off
Capable 1 – 12, H, The box ID is assigned either by user
h, G (static mode) or by the system
(automatic mode). When the box
become a primary master, the 7
segment works as bi-function. That is
box ID and "H" indicate as primary
Master and the display will be shown
by turn. That is boxID -> H -> boxID ->
H
1-12: To indicate the stacking of the
switch
H: When device was assigned as the
stacking Master
41