Appendix Section; Appendix A - Technical Specifications; General; Physical And Environmental - D-Link xStack Hardware Installation Manual

xStack® DGS-3420 Series Layer 2+ Managed Stackable Gigabit Switch Hardware Installation Reference Guide

Appendix Section

Appendix A – Technical Specifications

General

Feature
Standards
Protocols
Data Transfer Rates:
Ethernet
Fast Ethernet
Gigabit Ethernet
10 Gigabit Ethernet
Stacking Topology
Network Cables

Physical and Environmental

Feature
Internal Power Supply
Optional Redundant
Power Supply
Fans
Power Consumption
Detailed Description
IEEE 802.3 compliance
IEEE 802.3u compliance
Support Full-Duplex operations
IEEE 802.3az compliance (Hardware Version :B1)
IEEE 802.3x Flow Control support for Full-Duplex mode
IEEE 802.3ab compliance
IEEE 802.3af compliance (DGS-3420-28PC & DGS-3420-52P only)
IEEE 802.3at compliance (DGS-3420-28PC & DGS-3420-52P only)
IEEE 802.3z compliance
IEEE 802.3ae compliance
IEEE 802.3aq compliance
IEEE 1588
CSMA/CD
Half-duplex Full-duplex
10 Mbps 20Mbps
100Mbps 200Mbps
------------- 2Gbps
------------- 20Gbps
Duplex Ring, Duplex Chain
Cat.5 Enhanced for 1000BASE-T
UTP Cat.5, Cat. 5 Enhanced for 100BASE-TX
UTP Cat.3, 4, 5 for 10BASE-T
EIA/TIA-568 100-ohm screened twisted-pair (STP)(100m)
Detailed Description
AC Input: 100~240VAC, 50~60Hz
One connector in back to install optional external RPS. When internal power fails, the
optional external RPS will take over all the power supply immediately and automatically.
DPS-500: DGS-3420-28SC/28TC/26SC/52T
DPS-700: DGS-3420-28PC/52P
The IC Sensor detects the temperature on the switch automatically, and adjusts the speed.
For hardware version A1/A2, the following applies:
DGS-3420-28SC: 60.3 Watts (Max.)
DGS-3420-28TC: 50.8 Watts (Max.)
39