Traps; Management Information Base (Mib) - D-Link xStack Hardware Installation Manual

Dgs-3420 series layer 2+ managed stackable gigabit switch

Hide thumbs Also See for xStack:

Table of Contents

xStack® DGS-3420 Series Layer 2+ Managed Stackable Gigabit Switch Hardware Installation Reference Guide

Traps

Traps are messages that alert network personnel of events that occur on the Switch. The events can be as serious as a

reboot (someone accidentally turned OFF the Switch), or less serious like a port status change. The Switch generates

traps and sends them to the trap recipient (or network manager). Typical traps include trap messages for Authentication

Failure, Topology Change and Broadcast\Multicast Storm.

The Switch in the Management Information Base (MIB) stores management and counter information. The Switch uses the

standard MIB-II Management Information Base module. Consequently, values for MIB objects can be retrieved from any

SNMP-based network management software. In addition to the standard MIB-II, the Switch also supports its own

proprietary enterprise MIB as an extended Management Information Base. The proprietary MIB may also be retrieved by

specifying the MIB Object Identifier. MIB values can be either read-only or read-write.

Table of Contents

Show Quick Links

Table of Contents