Canon Pixma MP560 Series Getting Started page 6

o o
t
E
Plug the power cord into the back
left of the machine, then connect
the other end to the wall outlet.
Open the Operation Unit (8) and
press the ON button (C) to turn on the
machine.
Use the'" or ... button (D) on the Operation
Panel to select the language for the LCD (E),
then press the OK button.
When the above
screen is displayed,
press the OK button
and go to the next
step.
~-------
Do NOT connect the USB cable at
this stage.
• Make sure that the Document Cover
(A) is closed.
4
Hardware Setup
Eill _
• The machine may make some operating
noises. This is normal operation.
~---------------
• If an unintended language is displayed on the LCD, press the Back button (F) to return to
the Language selection screen.