Canon Pixma MP560 Series Getting Started page 27

.~1,
Wireless LAN setup ~ WPS setli~~s
Select WPS settings, then press the
OK button.
Select Push button method, then press the OK button. Press the OK button.
~-----------------------
To use the PIN code method for setup, select PIN method in step
0,
then press the OK button. Follow the on-screen instructions to
operate the machine and access point. When the setup is complete, the completion screen appears. Press the OK button to return to the
Settings screen.
A timeout error occurs if setup is not completed within 10 minutes. If the timeout error screen appears, press the OK button, then perform
the setup again and set the new PIN code displayed on the screen to the access point. If another error appears, refer to the printed
manual: Network Setup Troubleshooting.
Wireless Connection
25