Reducing The Effects Of Screen Burn; Setting The Function Help - Samsung FP-T5084 Owner's Instructions Manual

I
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts.
1 Press the MENU button to display the menu.
Press the • or • button to select Setup, then press the ENTER button.
2 Press the. or • button to select Screen Burn Protection, then press the
ENTER button.
3 Press the. or • button to select White, Scrolling or Side Gray
then press the ENTER button.
Press the EXIT button to exit.
White
This function removes after-images on the screen by changing the color of pixels to
white. Use this function when there are remaining after-images or symbols on the
screen especially when you displayed a still image on the screen for a long time.
Scrolling
This function removes after-images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after-images
or symbols on the screen especially when you displayed a still image on the screen
for a long time.
Side Gray
When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
To prevent the screen burn from happening, select Dark or Light.
• Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
• Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
~
To remove after-images on the screen, use either the White or Scrolling
function. Although both functions remove after-images on the screen, Scrolling
is more effective.
~
The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen. If the
after-image is not removed after performing the function, repeat the function
again.
~ Press any key on the remote control to cancel this feature.
1 Press the MENU button to display the menu.
Press the. or • button to select Setup, then press the ENTER button.
2 Press the • or • button to select Function Help, then press the ENTER
button.
3 Press the. or • button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
~ The Function Help default setting is On.
I
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts.
1 Press the MENU button to display the menu.
Press the • or • button to select Setup, then press the ENTER button.
2 Press the. or • button to select Screen Burn Protection, then press the
ENTER button.
3 Press the. or • button to select White, Scrolling or Side Gray
then press the ENTER button.
Press the EXIT button to exit.
White
This function removes after-images on the screen by changing the color of pixels to
white. Use this function when there are remaining after-images or symbols on the
screen especially when you displayed a still image on the screen for a long time.
Scrolling
This function removes after-images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after-images
or symbols on the screen especially when you displayed a still image on the screen
for a long time.
Side Gray
When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
To prevent the screen burn from happening, select Dark or Light.
• Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
• Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
~
To remove after-images on the screen, use either the White or Scrolling
function. Although both functions remove after-images on the screen, Scrolling
is more effective.
~
The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen. If the
after-image is not removed after performing the function, repeat the function
again.
~ Press any key on the remote control to cancel this feature.
1 Press the MENU button to display the menu.
Press the. or • button to select Setup, then press the ENTER button.
2 Press the • or • button to select Function Help, then press the ENTER
button.
3 Press the. or • button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
~ The Function Help default setting is On.