Samsung FP-T5084 Owner's Instructions Manual page 48

Setting the On/Off Timer
Use this feature to set the TV to turn on or off at a desired time. You must set
the clock first.
1 Press the MENU button to display the menu.
Press the ~ or T button to select Setup, then press the ENTER button.
Press the
~
or T button to select Time, then press the ENTER button.
2 Press the ~ or T button to select Timer1, Timer2 or Timer3, then press the
ENTER button. The timer menu is displayed.
Press the ~ or T button to adjust hour, then press the ~ button to move to the
next step. Set other items using the same method as above.
3 Press the .... or ~ button to select the desired item below.
Press the ~ or T button to adjust the setting.
Press the EXIT button to exit.
Activate or Inactivate Press the .. or Y button
Select Once, Everyday, Mon-Fri, Mon- Sat,
Repeat
Sat-Sun. Sets the desired day(s) of the Press the .. or Y button
week you want the TV to turn on.
Volume Select the desired turn on volume level. Press the .. or Y button
When the On Timer is active, you can
turn on a specific channel or play back
Contents
contents such as photo or audio files. Press the .. or Y button
(Make sure that an USB device is
connected to your TV.)
~ You can set the hour and minute directly by pressing the number buttons on
the remote control.
~
Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by timer.
This function is only available in timer On mode and prevents overheating,
which may occur if a TV is on for too long time.
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90,
120,150 and 180 minutes).
1 Press the MENU button to display the menu.
Press the
~
or .. button to select Setup, then press the ENTER button.
Press the
~
or .. button to select Time, then press the ENTER button.
2 Press the
~
or T button to select Sleep Timer, then press the ENTER button.
3 Press the
~
or T button to select the minute.
Setting the Timer sets the Activation to On automatically.
To cancel the set sleep timer:
Press the ~ button to select Activation.
Press the
~
or T button to select Off, then press the ENTER button.
Press the EXIT button to exit.
~
Press the SLEEP button on the remote control until the appropriate time interval appears
(any of the preset values from 30 min to 180 min).
----
[---FAVeA---tAP116N'----"~------------
-----
0 0 0 0
SlEEP SRS MTS CH
c" __ f"7.!D 0 0
""i£T
ORES£!
----- ---------_
..
_---------------------
Setting the On/Off Timer
Use this feature to set the TV to turn on or off at a desired time. You must set
the clock first.
1 Press the MENU button to display the menu.
Press the ~ or T button to select Setup, then press the ENTER button.
Press the
~
or T button to select Time, then press the ENTER button.
2 Press the ~ or T button to select Timer1, Timer2 or Timer3, then press the
ENTER button. The timer menu is displayed.
Press the ~ or T button to adjust hour, then press the ~ button to move to the
next step. Set other items using the same method as above.
3 Press the .... or ~ button to select the desired item below.
Press the ~ or T button to adjust the setting.
Press the EXIT button to exit.
Activate or Inactivate Press the .. or Y button
Select Once, Everyday, Mon-Fri, Mon- Sat,
Repeat
Sat-Sun. Sets the desired day(s) of the Press the .. or Y button
week you want the TV to turn on.
Volume Select the desired turn on volume level. Press the .. or Y button
When the On Timer is active, you can
turn on a specific channel or play back
Contents
contents such as photo or audio files. Press the .. or Y button
(Make sure that an USB device is
connected to your TV.)
~ You can set the hour and minute directly by pressing the number buttons on
the remote control.
~
Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by timer.
This function is only available in timer On mode and prevents overheating,
which may occur if a TV is on for too long time.
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90,
120,150 and 180 minutes).
1 Press the MENU button to display the menu.
Press the
~
or .. button to select Setup, then press the ENTER button.
Press the
~
or .. button to select Time, then press the ENTER button.
2 Press the
~
or T button to select Sleep Timer, then press the ENTER button.
3 Press the
~
or T button to select the minute.
Setting the Timer sets the Activation to On automatically.
To cancel the set sleep timer:
Press the ~ button to select Activation.
Press the
~
or T button to select Off, then press the ENTER button.
Press the EXIT button to exit.
~
Press the SLEEP button on the remote control until the appropriate time interval appears
(any of the preset values from 30 min to 180 min).
----
[---FAVeA---tAP116N'----"~------------
-----
0 0 0 0
SlEEP SRS MTS CH
c" __ f"7.!D 0 0
""i£T
ORES£!
----- ---------_
..
_---------------------