Auto Wall-Mount Adjustment (Sold Separately) (Fp-T5084) - Samsung FP-T5084 Owner's Instructions Manual

Once the auto wall mount is installed, the position of your TV can be easily adjusted.
I
Auto Wall-mount adjustment (Sold separately) (FP-T5084)
EX·LINK Cable (Not supplied)
TV Rear Panel
PC IN
AUDIO PC
Auto Wall-Mount
o
=
Entering the menu
1 Press the MENU button to display the menu.
Press the .A. or T button to select Setup, then press the ENTER button.
2 Press the .A. or T button to select Wall-Mount Adjustment, then press the
ENTER button.
3 Adjust to the desired position using the .A./T I~/~ buttons.
Press the EXIT button to exit.
~ If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
~ When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last adjusted position.
Using the remote Control Buttons
Button Operations
~
Wall-mount angle Tilt Up, Tilt Down, Move right, Move left
8 D
adjustment
<::::::::>
we
Reset Moves to the initial installation position.
0
Remembering the 1. Select the Direction buttons of the remote control.
position and moving
2. Press the red button (Select Position 1).
to the remembered 3. Adjust the set to a desired position following the wall mount owner's manual.
position
4. When 10 seconds have passed in a particular position, the wall mount
adjustment screen disappears and the current position is stored in Select
Position 1.
PJIOIlE
SllOOE STU
5. By using the green button (Select Position 2), and the yellow button (Select
---
Position 3), you can save positions according to the procedures above.
6. You can save 3 respective positions. To the red button (Select Position 1),
green button (Select Position 2), and yellow button (Select Position 3). If you
press a button after saving, the set automatically moves to that saved angle.
7. If you additionally move the set from a saved position, the last position is
saved.
~ For installation, refer to the Installation Manual provided with the wall mount.
~ For product installation and the installation and moving of the wall mount, make
sure to consult a specialized installation company.
~
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
I
Auto Wall-mount adjustment (Sold separately) (FP-T5084)
EX·LINK Cable (Not supplied)
TV Rear Panel
PC IN
AUDIO PC
Auto Wall-Mount
o
=
Entering the menu
1 Press the MENU button to display the menu.
Press the .A. or T button to select Setup, then press the ENTER button.
2 Press the .A. or T button to select Wall-Mount Adjustment, then press the
ENTER button.
3 Adjust to the desired position using the .A./T I~/~ buttons.
Press the EXIT button to exit.
~ If you press an arrow button when no OSD is displayed on the TV screen, the
Adjustment screen appears.
~ When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last adjusted position.
Using the remote Control Buttons
Button Operations
~
Wall-mount angle Tilt Up, Tilt Down, Move right, Move left
8 D
adjustment
<::::::::>
we
Reset Moves to the initial installation position.
0
Remembering the 1. Select the Direction buttons of the remote control.
position and moving
2. Press the red button (Select Position 1).
to the remembered 3. Adjust the set to a desired position following the wall mount owner's manual.
position
4. When 10 seconds have passed in a particular position, the wall mount
adjustment screen disappears and the current position is stored in Select
Position 1.
PJIOIlE
SllOOE STU
5. By using the green button (Select Position 2), and the yellow button (Select
---
Position 3), you can save positions according to the procedures above.
6. You can save 3 respective positions. To the red button (Select Position 1),
green button (Select Position 2), and yellow button (Select Position 3). If you
press a button after saving, the set automatically moves to that saved angle.
7. If you additionally move the set from a saved position, the last position is
saved.
~ For installation, refer to the Installation Manual provided with the wall mount.
~ For product installation and the installation and moving of the wall mount, make
sure to consult a specialized installation company.
~
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.