Samsung FP-T5084 Owner's Instructions Manual page 68

Rotating
1 After switching the mode to WISELlNK, select the memory device that you have
inserted. (Refer to page 63)
2 Press the .... or
~ button to select Photo, then press the ENTER button.
JPEG files and existing folders are displayed.
3 Press the AfT f ....
f~
buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full
screen.
4 Press the INFO button to display the option (Slide Show, Rotate, Zoom, List).
Press the A or T button to select Rotate, then press the ENTER button.
Each time the ENTER button is pressed, the photo rotates repeatedly.
(90°
--->
180°
--->
270°
--->
0°)
;;.. Rotating directly from 90 degrees to 270 degrees is not possible.
;;.. When rotating a photo, the edge of the photo may not be displayed on the
screen.
To exit WISELINK mode, press the WISELINK button on the remote control.
;;.. The rotated file is not saved.
The Rotating function information icon (Displayed at the top left of the screen).
Icon Current OSO
Function
~
Rotating
(gOO)
To rotate a photo by
gO
degrees
~
Rotating
(180 0
)
To rotate a photo by
180
degrees
~
Rotating
(270 0
)
To rotate a photo by
270
degrees
-
Rotating
(0
0
)
To rotate a photo to its original state.
~
Press the
WISELINK
button on the remote control to turn on the
WISELINK
mode.
Continued...
Rotating
1 After switching the mode to WISELlNK, select the memory device that you have
inserted. (Refer to page 63)
2 Press the .... or
~ button to select Photo, then press the ENTER button.
JPEG files and existing folders are displayed.
3 Press the AfT f ....
f~
buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full
screen.
4 Press the INFO button to display the option (Slide Show, Rotate, Zoom, List).
Press the A or T button to select Rotate, then press the ENTER button.
Each time the ENTER button is pressed, the photo rotates repeatedly.
(90°
--->
180°
--->
270°
--->
0°)
;;.. Rotating directly from 90 degrees to 270 degrees is not possible.
;;.. When rotating a photo, the edge of the photo may not be displayed on the
screen.
To exit WISELINK mode, press the WISELINK button on the remote control.
;;.. The rotated file is not saved.
The Rotating function information icon (Displayed at the top left of the screen).
Icon Current OSO
Function
~
Rotating
(gOO)
To rotate a photo by
gO
degrees
~
Rotating
(180 0
)
To rotate a photo by
180
degrees
~
Rotating
(270 0
)
To rotate a photo by
270
degrees
-
Rotating
(0
0
)
To rotate a photo to its original state.
~
Press the
WISELINK
button on the remote control to turn on the
WISELINK
mode.
Continued...