Reducing The Effects Of Screen Burn; Setting The Function Help - Samsung HP-T4254 Owner's Instructions Manual

Reducing the Effects of Screen Burn
if screen burn has occurred, you can select a white screen or scroling to help remove screen burn artifacts.
1
2
3
Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
Press the & or _' button to select Screen Burn Protection, then press the
ENTER button.
Press the A or _' button to select White, Scroling, or Side Gray
then press the ENTER button.
Press the EXiT button to exit.
White
This function removes after-images on the screen by changing the color of pixels to
white. Use this function when there are remaining after-images or symbols on the
screen especially when you displayed a still image on the screen for a long time.
Scrolin£
This function removes after-images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after-images
or symbols on the screen especially when you displayed a still image on the screen
for a long time.
Side Gray
When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
To prevent the screen burn from happening, select Dark or Light.
J Dark:When you setthe screen ratio to 4:3, it darkensthe left and right sides.
, Light: When you set the screen ratioto 4:3, it brightens the left and right sides.
_-- To remove after-images on the screen, use either the White or Scroling
function. Although both functions remove after-images on the screen, Scroling
is more effective.
;,_ The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen. If the
after-image is not removed after performing the function, repeat the function
again.
_-- Press any key on the remote control to cancel this feature.
Setting the Function Help
Displays help on the menu functions.
1
2
Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
Press the A or _' button to select Function Help, then press the ENTER
button.
3 Press the A or _' button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
_-- The Function Help default setting is On.