Changing The Screen Size - Samsung FP-T5084 Owner's Instructions Manual

I
Changing the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size
options, each designed to work best with specific types of video input. Your cable box or satellite receiver may
have its own set of screen sizes as well.
In general you should view the TV in 16:9 mode as much as possible.
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the
.6
or T button to select Size, then press the ENTER button.
3 Press the
.6
or T button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 : Expands the Zoom1 format picture.
• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
• Just Scan: Use this function to see the full image without any cutoff when HOMI,
Component (720p/1080i/1080p) or OTV(1080i) signals are input.
lEJ
Press the P.SIZE button on the remote control to change the picture size.
1.6..;i
Sets the picture to 16:9
wide mode.
Wide Fit
Enlarges the aspect ratio
of the picture to fit the
entire screen.
~
The screen size when
Wide screen is vertically
enlarged.
~
Sets the picture to 4:3
normal mode.
~
The screen size when
the Zoom1 screen is
vertically enlarged.
Just Scan
Use this function to see the
full image without any cutoff
when HOMI, Component
(720p/1 080i/1 080p) or
OTV(1080i) signals are input.
> .
Some cable boxes and satellite receivers have their own set of screen sizes,
which may differ from the ones above.
• In TV, VIDEO, S-VIDEO and COMPONENT(480i, 480p) modes, all screen
modes can be selected. (16:9
-+
Zoom1
-+
Zoom2
-+
4:3)
• In COMPONENT(720p, 1080i) or HDMI(720p, 1080i) mode, 16:9,4:3 and
Wide Fit can be selected.
• In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the
screen by pressing the
.6
or T button.
• You can not change the picture size when PIP is set to Double.
• When Double (CD,
[IJ)
mode has been set in PIP, the Picture Size cannot
be set.
• Wide Fit can be used when watching a Digital HD (High Definition) signal.
Wide Fit sets the optimum picture format by expanding it both horizontally and
vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit
does not support all external devices (DVD, VCR, etc.).
I
Changing the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size
options, each designed to work best with specific types of video input. Your cable box or satellite receiver may
have its own set of screen sizes as well.
In general you should view the TV in 16:9 mode as much as possible.
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the
.6
or T button to select Size, then press the ENTER button.
3 Press the
.6
or T button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 : Expands the Zoom1 format picture.
• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
• Just Scan: Use this function to see the full image without any cutoff when HOMI,
Component (720p/1080i/1080p) or OTV(1080i) signals are input.
lEJ
Press the P.SIZE button on the remote control to change the picture size.
1.6..;i
Sets the picture to 16:9
wide mode.
Wide Fit
Enlarges the aspect ratio
of the picture to fit the
entire screen.
~
The screen size when
Wide screen is vertically
enlarged.
~
Sets the picture to 4:3
normal mode.
~
The screen size when
the Zoom1 screen is
vertically enlarged.
Just Scan
Use this function to see the
full image without any cutoff
when HOMI, Component
(720p/1 080i/1 080p) or
OTV(1080i) signals are input.
> .
Some cable boxes and satellite receivers have their own set of screen sizes,
which may differ from the ones above.
• In TV, VIDEO, S-VIDEO and COMPONENT(480i, 480p) modes, all screen
modes can be selected. (16:9
-+
Zoom1
-+
Zoom2
-+
4:3)
• In COMPONENT(720p, 1080i) or HDMI(720p, 1080i) mode, 16:9,4:3 and
Wide Fit can be selected.
• In Zoom1, Zoom2 and Wide Fit modes, you can move the picture on the
screen by pressing the
.6
or T button.
• You can not change the picture size when PIP is set to Double.
• When Double (CD,
[IJ)
mode has been set in PIP, the Picture Size cannot
be set.
• Wide Fit can be used when watching a Digital HD (High Definition) signal.
Wide Fit sets the optimum picture format by expanding it both horizontally and
vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit
does not support all external devices (DVD, VCR, etc.).