Advertisement
that accompanied the purchase of your computer).
5. Replace the computer cover.
6. If unplugged, plug computer and all peripherals back in to power
source. Turn your computer on.
Driver Installation
Windows® 2000/XP/Server 2003
1. When the Found New Hardware Wizard window pops up, please
click the "Cancel" button to cancel the driver installation for the device
at this moment. The driver will be installed in the next step.
2. Please insert the included driver CD into your CD-ROM Drive.
3. From the Start Bar, click Run.
4. Type D:\PCIe\LAN\setup.exe, then click OK. (Change D:\ to match
your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the installation.
6. Restart Windows to finalize the installation.
Windows® Vista
1. Please insert the included driver CD into your CD-ROM Drive.
2. From the Start Bar, click Run.
3. Type D:\PCIe\LAN\Vista\setup.exe, then click OK. (Change D:\ to
match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the installation.
5. Restart Windows to finalize the installation.
Verifiying Driver Installation
Navigate to the Windows Control Panel and click on System Prop-
erties, then the "Device Manager" tab. You should see a "Realtek
RTL8168/8111 PCI-E Gigabit Ethernet NIC (Windows® 2000/XP/Serv-
2
Advertisement
