Advertisement
Installation
Package Contents
•
1 x Driver CD
•
1 x Gigabit Ethernet Card
•
1 x Low Profile Bracket
•
1 x Manual
System Requirements
•
Windows® 2000/XP/Server 2003/Vista
•
PCI Express-enabled system with an available PCI Express slot
•
CAT5/CAT5E/CAT6 UTP/STP cable
Hardware Installation
To connect the ST1000SPEX to the computer motherboard:
1. Shut down all power connected to the computer, as well as all
devices connected to the computer peripherally (i.e. Printers, Monitors,
Scanners etc.). As an added step to ensure safe installation, unplug
the power supply from the power outlet.
2. Remove the computer cover. For more detailed instruction on how to
perform this step, please refer to the documentation that was included
with your computer at the time of purchase.
3. Locate an empty PCI Express (x1) slot, removing the metal bracket
covering the corresponding port/socket located at the back of the com-
puter case. Please note: This card will function correctly in extended
PCIe slots (e.g. x4, x16) if available.
4. Position the card above the open PCI Express slot, ensuring that the
card is aligned with the entire slot. Insert the card firmly into the slot,
distributing force evenly across the length of the board. Once inserted,
secure the card into the adjoining socket (previously covered by metal
bracket), using the correct size screw (please consult documentation
1
Advertisement
