Download Print this page
StarTech.com ST1000SPEX Instruction Manual
StarTech.com ST1000SPEX Instruction Manual

StarTech.com ST1000SPEX Instruction Manual

Pci express 10/100/1000 mbps gigabit ethernet card
Hide thumbs Also See for ST1000SPEX:

Advertisement

Quick Links

ST1000SPEX
Instruction Manual
PCI Express 10/100/1000
Mbps Gigabit Ethernet Card

Advertisement

loading

Summary of Contents for StarTech.com ST1000SPEX

  • Page 1 ST1000SPEX Instruction Manual PCI Express 10/100/1000 Mbps Gigabit Ethernet Card...
  • Page 2 StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an en- dorsement of the product(s) to which this manual applies by the third-party company in question.
  • Page 3 Table of Contents Introduction ..............1 Features ..................1 Package Contents ...............1 Hardware Guide ............... 2 Specifications ................4 Installation & Connection .............4 Technical Support ............5 Warranty Information ............5...
  • Page 4 • CAT5/CAT5E/CAT6 UTP/STP cable Hardware Installation To connect the ST1000SPEX to the computer motherboard: 1. Shut down all power connected to the computer, as well as all devices connected to the computer peripherally (i.e. Printers, Monitors, Scanners etc.). As an added step to ensure safe installation, unplug the power supply from the power outlet.
  • Page 5 that accompanied the purchase of your computer). 5. Replace the computer cover. 6. If unplugged, plug computer and all peripherals back in to power source. Turn your computer on. Driver Installation Windows® 2000/XP/Server 2003 1. When the Found New Hardware Wizard window pops up, please click the “Cancel”...
  • Page 6: Troubleshooting

    1. Make sure that the ST1000SPEX is correctly inserted into the PCI Express slot; if not, turn off the computer and plug it again. 2. If the ST1000SPEX is plugged in correctly, see if the golden connec- tors on the card are clean; if not, clean the connector surface.
  • Page 7 Computer failed to start after inserting Gigabit Ethernet PCI Express Card. Turn off the computer, remove the ST1000SPEX, and try to restart the computer. If the computer starts successfully, it means that this card has not been inserted into the PCI Express slot correctly. Please insert the card firmly into the PCI Express slot or try another slot.
  • Page 8: Specifications

    Specifications Bus Type PCI Express Full Duplex Support 2 X 100 Link/Active LED (Green) LED Indicators Gigabit Link/Active LED (Green) Maximum Data Transfer Rate 2.5 Gbps Number of Ports Auto MDIX...
  • Page 9: Technical Support

    Technical Support StarTech.com’s lifetime technical support is an integral part of our com- mit-ment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our com- prehensive selection of online tools, documentation, and downloads.
  • Page 10 StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Serv-...