Table of Contents
Advertisement
RF-TVMFM02V2 TV Wall Mount
Step 8 Adjusting the tension and leveling the arm assembly
1
Loosen the two screws on the arm assembly using the 5/32" hex key (Y), then using a level, adjust the arm
assembly ± 6° either clockwise or counter-clockwise to level it.
2
Using a 3/16" hex key (Z), or your hand, loosen the knob on the right side of the arm assembly, then adjust
the tilt ± 11°.
3
Using a 5/32" hex key (Y) loosen the screw on the bottom front of the arm assembly and adjust the swivel by
grasping the TV on both edges and moving it.
4
Using a 5/32" hex key (Y) loosen the screw on the bottom rear of the arm assembly and adjust the swivel by
grasping the TV on both edges and pushing back or pulling forward.
5
Retighten all adjustment points (screws and knobs). Do not overtighten.
Z
TILT
You'll need
3/16 in.
SWIVEL
Y (1)
Need help? Call 800-620-2790
LEVEL
EXTEND/RETRACT
5/32 in.
Y
Z (1)
Level
15
Hide quick links:
Advertisement
Table of Contents
