RocketFish RF-TVMFM03 Assembly Manual
  1. Manuals
  2. Brands
  3. RocketFish Manuals
  4. TV Mount
  5. RF-TVMFM03
  6. Assembly manual

RocketFish RF-TVMFM03 Assembly Manual

Tv wall mount
Hide thumbs Also See for RF-TVMFM03:
Table of Contents

Advertisement

Quick Links

RF-TVMFM03
TV Wall Mount
For wood-stud
installation only
Safety Information And Specifications .................................2
Tools Needed.................................................................................3
Parts..................................................................................................4
Assembly Instructions................................................................7
Assembly Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RF-TVMFM03 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RocketFish RF-TVMFM03

Summary of Contents for RocketFish RF-TVMFM03

  • Page 1 RF-TVMFM03 TV Wall Mount Safety information and specifications .........2 Tools needed.................3 Parts....................4 Assembly instructions..............7 For wood-stud Assembly Guide installation only...

  • Page 2: Safety Information And Specifications

    We’re here for you about the safety of the installation, contact Customer www.rocketfishproducts.com Service or call a qualified contractor. Rocketfish is not responsible for damage or injury caused by incorrect For customer service, call: installation or use.

  • Page 3: Tools Needed

    RF-TVMFM03 TV Wall Mount Tools needed You will need the following tools to assemble your new TV wall mount: Edge-to edge Pencil Level Drill stud finder Phillips screwdriver Socket wrench with 7/32" (5.5 mm) wood 1/2" (13 mm) socket or...
  • Page 4 RF-TVMFM03 TV Wall Mount Parts Package contents: parts Make sure you have all the parts necessary to assemble your new TV wall mount: A Right vertical TV B Left vertical TV C Horizontal TV bracket (2) bracket (1) bracket (1)
  • Page 5 RF-TVMFM03 TV Wall Mount Package contents: hardware Make sure you have all the hardware necessary to assemble your new TV wall mount: M4 bag Label Hardware Qty. Label Hardware Qty. M4 × 12 mm M4/M5 washer screw M4 × 30 mm...
  • Page 6 RF-TVMFM03 TV Wall Mount Lag bolt bag Label Hardware Qty. Label Hardware Qty. Lag bolt washer 5/16" × 2 3/4" lag bolt Bracket hardware bag Label Hardware Qty. Label Hardware Qty. 9/16" × 8/32" 3/8" × 8/32" Phillips Phillips head...

  • Page 7: Assembly Instructions

    RF-TVMFM03 TV Wall Mount Assembly instructions Step 1 Determine whether your TV has a flat back or an irregular or obstructed back Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.
  • Page 8 RF-TVMFM03 TV Wall Mount Step 2 Select screws, washers, and spacers Select the hardware for your TV (screws, washers, and spacers). See the documentation that came with your TV for screw length and diameter. Select one of the following types of screws: M4 ×...
  • Page 9 RF-TVMFM03 TV Wall Mount Step 3 Install the vertical TV brackets Option 1: Installing for a TV with a flat back Align the holes you noted on the right vertical TV bracket (A) and left vertical TV bracket (B) with the screw holes on the back of your TV.
  • Page 10 RF-TVMFM03 TV Wall Mount Step 3 Install the vertical TV brackets (continued) Option 2: Installing for an irregular or obstructed back Note: Use additional washers (H) with M4/M5 hardware only. Place the M4/M5 spacers (I) or M6/M8 spacers (P) and the M4/M5 washers (H) into the recessed screw holes on the back of your TV.
  • Page 11 RF-TVMFM03 TV Wall Mount Step 4 Install the horizontal TV brackets Slide the horizontal bars (C) through the metal guides on the vertical TV brackets. Secure the horizontal TV brackets to the vertical TV brackets using the 9/16" × 8/32" Phillips head screws (W).
  • Page 12 RF-TVMFM03 TV Wall Mount Step 5 Determine wall-mount location Note: For help with determining where you need to drill screw holes, use the HeightFinder™ Installation Assistant at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder The center of your TV will match the center of the wall plate (E). Before you drill holes in the wall: Measure the distance between the middle of one of the vertical brackets and the bottom of your TV.
  • Page 13 RF-TVMFM03 TV Wall Mount Step 6 Install the wall plate to a wood stud wall Note: Any material (such as sheetrock) covering the wall must not exceed 5/8" (16 mm). Locate the studs. Verify the center of the stud with an edge-to-edge stud finder.
  • Page 14 RF-TVMFM03 TV Wall Mount Step 7 Attach the arm assembly Hang the upper lip of the arm assembly (D) over the top lip on the wall plate (E), then lower the bottom lip of the arm assembly into the bottom lip on the wall plate.
  • Page 15 RF-TVMFM03 TV Wall Mount Step 8 Attach your TV to the wall mount Slide the top and bottom edges of the arm assembly under the metal tabs on the TV horizontal brackets (C). Align the center hole in the lower horizontal bar (C) with the hole in the face of the arm assembly (D) and secure your TV with the bracket screw (X).
  • Page 16 RF-TVMFM03 TV Wall Mount Step 9 Adjusting the viewing angle When the television is mounted onto the arm assembly and secured, it can be adjusted to make it level. Loosen the two screws on the arm assembly using the 5/32" hex key (Z).
  • Page 17 RF-TVMFM03 TV Wall Mount Step 10 Adjusting the swivel tension Adjust the swivel tension using the 5/32" hex key (Z). You’ll need Z (1) Need help? Call 800-620-2790...
  • Page 18 RF-TVMFM03 TV Wall Mount Step 11 Adjusting the forward or backward tilt Adjust the tilt of your TV forward or backward 11° using your fingers or the 3/16" hex key (T). 11° 11° You’ll need T (1) Need help? Call 800-620-2790...
  • Page 19 RF-TVMFM03 TV Wall Mount Step 12 Managing cables Use cable ties (Y) to bundle and secure TV cables to the arm assembly. Note: You may have to readjust the forward or backward tilt after you bundle the cables. You’ll need Y (5) For customer service, call: 800-620-2790 (U.S./Canada markets)
  • Page 20 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2011 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners. Part number: 6907-002019 <02>...

Table of Contents

Save PDF